You're right.
Any lock can be defeated by a thief with the time and sometimes the tools to do so. Locks are primarily included on items like bike racks to act as deterrents. In other words, to an extent they "work" sometimes just by encouraging the thief to take another bike that will be easier to steal than yours. Bolt cutters, hack saws and other tools can make short work of stealing a bike or a bike rack or both. There is, sadly, no such thing as "theft-proof".
The best way to decrease... view full answer...
The Hollywood Racks Sport Rider Bike Rack part # HR1000Z does have locks, for both the bikes and hitch but it's not a Brinks truck either. If a thief has the time and right tools he will get the rack and your bikes. There isn't a way to make the rack completely theft proof unfortunately. That said, to answer your specific question, no, there isn't a lock designed to replace that bolt and yes, if someone had enough time and knew enough about the rack they could remove the upright and your... view full answer...
The EcoHitch Hidden Trailer Hitch Receiver # 306-X7277 does rate a 10 out of 10 on our difficulty rating as it is a very in depth installation. It requires removal of the rear bumper cover and trimming of bumper cover, underbody panel and wire harness holder to properly install the receiver. There are several different tools such as a hack saw, coping saw, reciprocating saw, and a jig saw that would allow you to accomplish the cutting required. You will also need a basic set of hand tools... view full answer...
The Hollywood Racks Destination Bike Rack for 4 Bikes # HR4000 is held in place in the trailer hitch with a threaded anti-rattle hitch pin. This will require either the included tool or a socket wrench to remove and can be a bit more time consuming if the rear fascia sits close to the trailer hitch. I recommend tilting the hitch up whenever you're ready to remove it. You can then remove the hitch pin and lift/pull the rack out of the trailer hitch. view full answer...
The Thule Insta-Gater Pro # TH93VR will need to be installed square to the tailgate, but if the back wheel of the bike is shifted to the left or right by a few inches before the hook on the Insta-Gater is ratcheted down, the bike will stay upright for you and should fit just fine.
To see a demonstration video featuring the Insta-Gater, click on the provided link. view full answer...
When tightening the anti-rattle device of your Kuat Transfer V2 Bike Rack for 2 Bikes # KU74FR you'll want to tighten it until the bike rack no longer moves inside of the trailer hitch. When pressing on the bike rack the vehicle should move but the rack will won't budge in the hitch. Brad shows this in the attached video below at the 7:35 minute mark. view full answer...
Thank you so much for the suggestion and your purchase with us! While we do not carry one exactly like your model, we do carry the Feedback Sports Flop Stop Handlebar Holder # 301-13981 that achieves the same front-wheel stability and ease of loading as the Park Tool holder. It also has a telescoping bar that adjusts 20-35 inches to fit a variety of bike frame styles.
However, it is important to note that this should not serve as a replacement for a bike frame adapter bar like the Swagman... view full answer...
The Yakima speed knob feature use on the Yakima RidgeBack bike rack employs a wedge on the bike rack's shank that expands rearward and outward as the knob is tightened which serves to lodge the shank into the receiver tube. Will this lock provide some protection against a crime of opportunity? It sure will. A random passerby won't be able to simply grab the rack, give it a yank and walk away with it. However, if a thief is determined enough and has the tools and the lack of witnesses to... view full answer...
The Curt Trailer Hitch # C53HR would be a good fit for your 2017 CX90. I do understand your hesitation with installing the hitch because the bumper needs to be removed as well as the heat shield and skid shield if present. We do not have a list of installers around the country but If you have a trusted mechanic nearby, they will have the tools and a lift that will make the job much easier and they will be able to install the hitch.
This is a Class lll hitch and it has a 2-inch receiver... view full answer...
Go To Results